Reid
Member
I recently Acquired a Miller Dialarc HF-P Tig/Stick & Miller Regency 200 CC/CV with Aluminum Spool gun, The first Project i am Doing with it is a rake that will clamp on to the edge of an excavator bucket for spreading mulch.
So Far i have tacked the bottom and top lengths of angle together and tacked on 8" with 6" stick out pieces of 1" Rebar for the Tines, i still have to weld on some gussets behind the tines and attach some chain to hold it to the bucket.
Heres some Pictures of what i have so Far.
First is the 2 pieces of Angle tacked together
Second is with the Rebar tines sitting in place to finalize placement
Third is with the Rebar tacked on and rake set on bucket lip for test fit
So Far i have tacked the bottom and top lengths of angle together and tacked on 8" with 6" stick out pieces of 1" Rebar for the Tines, i still have to weld on some gussets behind the tines and attach some chain to hold it to the bucket.
Heres some Pictures of what i have so Far.
First is the 2 pieces of Angle tacked together
Second is with the Rebar tines sitting in place to finalize placement
Third is with the Rebar tacked on and rake set on bucket lip for test fit