Hello, i have an 03 IT28G with forks installed. The main lift cylinders will not lower unless manually powered (with a battery) at the solenoid on the manifold that is at the base of the cylinders. you only need to activate the right side for it to work because the left will do nothing. I have swapped all components from one manifold to another and nothing has changed. When I activate the right side manually, it is slow to lower (guessing because the left side will not work). To sum up what is going on
-slow lowering hydraulics on main lift cylinders
-main cylinders only lower when right side solenoid is activated manually and joystick is going down
-joystick will not activate solenoid
-
-slow lowering hydraulics on main lift cylinders
-main cylinders only lower when right side solenoid is activated manually and joystick is going down
-joystick will not activate solenoid
-