-
Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!
O-ring boss caps
- Thread starter John V
- Start date
-
- Tags
- cap orb oring boss plug
John V
Well-Known Member
I was skimming the manual for the t740 I bought and I seem to remember it saying the fittings were o-ring boss. If yall are saying the cylinders use JIC, I'll be happy as I already have loads of plugs/caps for that!
92U 3406
Senior Member
ORB is common on components like pumps, motors, cylinders etc. Its not often you're going to see hoses with crimped on ORB male fittings. The vast majority of the time the component is going to have an adapter fitting threaded in to it to go from the female ORB in the component to a male JIC or male ORFS.
terex herder
Senior Member
ORB is the most common way where there must be a 90 that has to be oriented properly.
HarleyHappy
Senior Member
Yes, ORBS are mostly used on valve bodies.