Sailorman
Member
While I am replacing valves and head gasket, I am also resealing the angle cylinders on my 6 way blade. The guide plates are very worn but I can fix that. The diagrams show a circular feature on the blade: ![upload_2022-6-12_22-18-5.png upload_2022-6-12_22-18-5.png](https://www.heavyequipmentforums.com/data/attachments/245/245771-337f0ae37417848ea94b47e802f11f72.jpg)
What is the mating feature on the Leveling Beam and how much play is allowed between them? Even using the tilt cylinder, there is far to much slop.
![upload_2022-6-12_22-18-5.png upload_2022-6-12_22-18-5.png](https://www.heavyequipmentforums.com/data/attachments/245/245771-337f0ae37417848ea94b47e802f11f72.jpg)
What is the mating feature on the Leveling Beam and how much play is allowed between them? Even using the tilt cylinder, there is far to much slop.