Snowblade

[good-dog]

I have a 2003 John Deere 110 backhoe, it is 7 feet long and will angle from left to right. It has a skid steer quick attachment

The question is. Is there a way to make the blade float/ pivot so the full edge of the blade would stay in contact with the ground

thanks

 

[onemank6]

Hi good-dog if im reading you question right most tractors i have run have a float position on the loader valve you just have to push the loader valve all the way forward and if yours are like the ones im talking about it will feel like you cant go forward anymore but if you keep pushing it forward it will go more and it detents (locks)in the float position until you pull back on it so loader bucket or your plow follows the contour of the ground