Thought I'd share the KPI-JCI plant I run at work

[WColtharp]

Here's the KPI-JCI 4250 impact crusher I run at work. I started out running a 950 loader for someone else running the plant and eventually earned the chance to run it myself. I'm still learning, and in most cases, the hard way, but I enjoy it. I've worked with 4230's and 4250's and they are some awesome machines that can tear through some rock!

Pic(1) KPI-JCI 4230(i think) loaded up for mobilization. This was the older crusher at work I started on before the current one was purchased
Pic(2) Plant setup (currently running)
Pic(3) 4250 waiting to take the screen off
Pic(4) Stacker

 

[funwithfuel]

Sweet! They'll gobble some material. Are you crushing all virgin or mixed recycle?

 

[funwithfuel]

Here is a 4250 feeding a variable frequency screen. 2 graded products discharge underneath with overs returning to crusher. It's set up for frap. We're in process of commisioning now.

 

[funwithfuel]

This was during set up and cribbing

 

[funwithfuel]

Here's the high angle screen.

 

[DARO]

What do you use the high angel screen for?

 

[funwithfuel]

Frap, rock, sand anything really except pure clay. It's a beast and flows a lot of material , quick.