Veez63
New Member
Hi guys I'm brand new to this forum hope u guys can help. So i have been working on a volvo escavator ec210 blc that won't start. The machine has a deutz D7D engine. I have measured the ohm reading on my cam and crank speed sensors they are in spec however I am not getting 5v supply to both sensors I am only getting 2v supply. So I took 5v supply from the oil pressure sensor and bridge them to the cam and crank speed sensor the machine still wont start so I removed the fuel pipes at the unit pumps and all 6 unit pumps spray at the same time. This seems to be incorrect as it should spray individually according to its firing order. Any suggestions as to what I should looks at? Much appreciated. Thanks