• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Wirtgen w2000

Ben Derstein

Member
Joined
Oct 25, 2022
Messages
7
Location
Pa
Anybody ever rebuild/seal a drive coupling in one of these. Looking for the procedure to take apart.
 

Tom3697

New Member
Joined
Dec 28, 2023
Messages
4
Location
United Kingdom
Yes, it is possible to rebuild or seal a drive coupling in many machines. Here is quick steps:

Locate the Couple: Find where it is located between the motor and the driven part.
Safety First: Turn off the machine and disconnect it from power.
Access and Inspect: Remove covers to access the coupling. check for damage.
Disassemble: Follow the manufacturer's instructions to take it apart.
Replace seals and parts: If needed, replace seals or damaged components with recommended parts.
Reassemble: Put everything back together carefully.
Test and Check: Turn the machine on and ensure the coupling works without leaks or strange noises.
Document: Keep track of what you've done for future reference.
 
Top