charles walton
Senior Member
Wondering if a power shift in a d4e would be compatible with a 941b
And you'll stay wondering unless you can supply more information........Wondering if a power shift in a d4e would be compatible with a 941b
80h6489And you'll stay wondering unless you can supply more information........
What''s the S/N of the 941B needing the transmission.?
So, provided it is the original transmission, it is a 9S-2812 which contains all the parts shown below but NOT the torque converter because it is different between models.80h6489
What will work in my other loader 80h0650So, provided it is the original transmission, it is a 9S-2812 which contains all the parts shown below but NOT the torque converter because it is different between models.
9S2812 was only used in 80H 941B machines from 5703-Up and in 86J 951B track loaders from first built up to 1991. It was also used in early 69H 951B machines but I can't identify a Serial Number range.
View attachment 308799
So if I were to buy the d4e I can use the transmission in either of the 941’s by changing the pinion, right?The 941B transmission has a different tooth count on the pinion to the D4E that is near the same as the 951C, also the bevel gear is a different tooth count, I could rattle on a good bit but these are the main things of change, the final drives are also different.