• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Recent content by Anthony93

  1. A

    wirtgen w2000

  2. A

    wirtgen w2000

    Hey guys I’m at a loss right now. I’m working on this machine and they want me to change the bearings at the bottom of the conveyor belt. I can access 3 of the 4 bolts on the block but the forth is directly behind the mount for the front of the drum on the arm that goes up and down. How on earth...
  3. A

    Wirtgen w2000

  4. A

    Wirtgen w2000

    Hey guys I’m at a loss right now. I’m working on this machine and they want me to change the bearings at the bottom of the conveyor belt. I can access 3 of the 4 bolts on the block but the forth is directly behind the mount for the front of the drum on the arm that goes up and down. How on earth...
  5. A

    Hitatchi

    whats the best ones to buy
  6. A

    Hitatchi

    Hey guys there’s two bolts on the hydraulic return filter plate that are stripped. 6 of the 8 are good and today it started spilling out the side. What’s the easiest way to fix this
  7. A

    318 g john deere skid wont lift bucket fast

    Ok when they put me on that project again I’ll try that. It’s never try again it’s if it doesn’t work the first time you put it aside and work on something else
  8. A

    318 g john deere skid wont lift bucket fast

    The guys were working and didnt notice the leak under the machine in time and completely ran it out of hydraulic but kept running it. the machine quit moving all together. so we took the tires off and the covers and jacked it up to watch the sprocket while moving. it wasnt moving hardly at all...
  9. A

    318 g john deere skid wont lift bucket fast

    1t0318gkegj299972 is the serial number
  10. A

    318 g john deere skid wont lift bucket fast

    hey guys im back again. Ive been working on a skidsteer. when it first came in it would raise and lower the bucket just fine but you could not turn in it. So we decided to replace both drive motors and the hydraulic pump. now we can turn and move just fine but when you go to raise the bucket...
  11. A

    w 220 mill

    what do all the letters mean? sorry im not very inclined when it comes to reading the schematic. the parts one is fine just cant seem to understand the electrical side of it
  12. A

    w 220 mill

    K hopefully I’ll be able to figure out something now. Thank you sir.
  13. A

    w 220 mill

    What’s the easiest way to read the electrical schematic?
  14. A

    w 220 mill

    That would be awesome sir thank you! It’s got me stumped at this point. Like it’ll lower when you open the valve up top and the one next to the belts slowly but that switch just won’t function it down. Up and down make it go up
  15. A

    w 220 mill

    Im not sure if it was red or not i dont recall but yes it was on the frame
See more
Top