• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Recent content by djoni

  1. D

    Manual for the KOMATSU PC50UU

    Hello. Please send the PC50UU-2 service manual to [email protected]
  2. D

    service manual Komatsu PC128UU

    Guys, could you share the service manual for the Komatsu pc128uu-1? I need a wiring diagram.
  3. D

    Problem with depth gauge and sensors. Caterpillar 305C Mitsubishi MM30SR, MM40SR, MM55SR.

    I made a transition board for other LED indicators, native ones do not exist in nature)) The controller had no indication.
  4. D

    Mitsubishi mm30sr

    Ok. Write to me at [email protected]
  5. D

    Mitsubishi mm30sr

    I am making a "plug" for the depth gauge to get rid of it and the sensors on the boom and these errors.
  6. D

    Mitsubishi mm30sr

    The controllers are identical and they fit each other. It's a pity that they ruined the wiring, the SCE error is elementary, it can be dealt with in 3 minutes, there was a bad contact in the depth gauge connector.
  7. D

    Mitsubishi mm30sr

    It is a bad decision to switch to cable control, many people re-do it back to the original control. I would advise trying to restore the wiring, there is nothing complicated there, there is a diagram, although not the best quality, but you can figure it out. I could make my own controllers for...
  8. D

    Mitsubishi mm30sr

    You need to restore the old wiring.
  9. D

    Problem with depth gauge and sensors. Caterpillar 305C Mitsubishi MM30SR, MM40SR, MM55SR.

    The sensors in the joysticks are very afraid of water((
  10. D

    Mitsubishi mm30sr

    What you bought the kit will not work 200%, you need to restore the original controller. Anything else that you will invent will not work) I went through this. I made my controller for an excavator, it still did not work as it should.
  11. D

    Mitsubishi mm30sr

    My address is [email protected]
  12. D

    Mitsubishi mm30sr

    Hello! Do you have a problem with the controller on your Mitsubishi MM55SR?
  13. D

    Problem with depth gauge and sensors. Caterpillar 305C Mitsubishi MM30SR, MM40SR, MM55SR.

    Repaired joysticks
  14. D

    Problem with depth gauge and sensors. Caterpillar 305C Mitsubishi MM30SR, MM40SR, MM55SR.

    The joysticks are a little worn out))
  15. D

    Problem with depth gauge and sensors. Caterpillar 305C Mitsubishi MM30SR, MM40SR, MM55SR.

    I'll write you an email now
See more
Top