• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Recent content by Frank Nesbitt

  1. F

    Cat 259B3 fuel issue when hot

    Ok, finally got results. After hours of fuel line replacement, watching bubbles, changing filters, searching for someone smarter than me i have an answer. My issue with unable to do a hot start has been fixed with an injector pimp. Took mine off and had bench tested.......low pressure when...
  2. F

    Cat 259B3 fuel issue when hot

    The return on this unit goes to the fuel tank. I'm getting some clear tubing to make sure what I think is going on is in fact what is going on.
  3. F

    Cat 259B3 fuel issue when hot

    My banjo connections are on the injector pump. The nut at the injector is where i get a little spit of fuel. The supply and return lines at the injector show no signs of air. ( used clear container to catch sample)
  4. F

    Cat 259B3 fuel issue when hot

    Baldwin Heavy Duty BF7863 In-Line Fuel Filter on the intake side of filter between tank and water seperator.
  5. F

    Cat 259B3 fuel issue when hot

    All new fuel lines primary plastic filter and cat water seperator.
  6. F

    Cat 259B3 fuel issue when hot

    Yes, head was completly removed, fittings and filter. Taken off the machine and verifird no blockage. Like i said in first post i verified fuel to the injector pump. No air in sample taken at pump just good clean fuel. Not getting from banjo fitting at inlet to injector. I did verify fuel...
  7. F

    Cat 259B3 fuel issue when hot

    Heymccall, thanks. I have replaced all fuel lines and checked the filter head and chrck valve. I will remove the bowl tomorrow and make sure it is installed
  8. F

    Cat 259B3 fuel issue when hot

    I recently acquired a early (YYZ05843) CAT 259B3 skid steer. When cold, the machine cranks and runs fine. Lots of power and no skipping, smoke...nothing out of the ordinary. After running just 5 minutes or so if the engine is cut off it will crank back up if tried in 10 seconds or so. Wait...
  9. F

    Cat 259b3 no air conditioner power

  10. F

    Cat 259b3 no air conditioner power

See more
Top