• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Recent content by Jeff logger alaska

  1. J

    Deere 550g dozer break band replacement

    My serial number is 767084 so the first page is my assembly 6 disks and 6 clutch plates whoever had this apart sometime in the past put it back together wrong. thanks
  2. J

    Deere 550g dozer break band replacement

    Skip that last sentence I looked closer at the parts and they are there
  3. J

    Deere 550g dozer break band replacement

    Well I think I found the problem I found the diagram in my book that you posted and my cluch pack is all messed up first of all there was 6 clutech disks and 6 linings on the right side, which worked perfectly but on the left side was 6 clutch discs and 5 linings. So in order to get any steering...
  4. J

    Deere 550g dozer break band replacement

    i keep my machine clean very clean I pull the bottom access panels every 3 months and clean out the sticks and debris then pressure wash because I use this machine every day in the woods ,there is a lot of stuff that finds its way into the bottom .when I pulled the transmission this spring I...
  5. J

    Deere 550g dozer break band replacement

    Hi Dave i got my dozer to the shop had to wait till I got my 518 log skidder out just put in a new 3304 engin in it.so anyway we pulled the transmission and sure enough the cluch material came un bonded from the backing plate. Some of the gears cluch material was starting to come loose also...
  6. J

    Cat 518 skidder dead engin need to tow to landing can’t get out of gear. Have auxiliary air to un lock brakes any suggestions.thanks

    We are using the block from a generator set because the crank shaft counter balance shaft were bent and broken with a cracked head.thanks
  7. J

    Cat 518 skidder dead engin need to tow to landing can’t get out of gear. Have auxiliary air to un lock brakes any suggestions.thanks

  8. J

    Cat 518 skidder dead engin need to tow to landing can’t get out of gear. Have auxiliary air to un lock brakes any suggestions.thanks

  9. J

    Cat 518 skidder dead engin need to tow to landing can’t get out of gear. Have auxiliary air to un lock brakes any suggestions.thanks

    Hi, well I got the machine back to shop pulled engine rebuilding now. but with the braking system how can I release the air brakes? Like on a big truck I can cage the brakes to unlock them. Any ideas thanks
  10. J

    Cat 518 skidder dead engin need to tow to landing can’t get out of gear. Have auxiliary air to un lock brakes any suggestions.thanks

    Have cat 518 log skidder with dead engin spun crank Bering. need to tow up to landing, can’t get out of gear to role have auxiliary air compressor to release the brake still won’t role any suggestions, thanks
  11. J

    Deere 550g dozer break band replacement

    They must have come from the transmisson
  12. J

    Deere 550g dozer break band replacement

    I did clean the suction screen and this is what I found only a few peace’s
  13. J

    Deere 550g dozer break band replacement

    One is smothe the other has some very fine scratches in it
  14. J

    Deere 550g dozer break band replacement

    I just got new break bands in and they don’t look the same. your thoughts on that.the old one is the black one.
  15. J

    Deere 550g dozer break band replacement

    Thanks for the help my final drive is a double reductio. Do I need to remove that shaft also? And how do I release the break band?
See more
Top