• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Recent content by Mrktrauth30

  1. M

    John Deere 6359t

    Yeah I think my bring it back and tell them they have to put the line on the rotor for me so I know it’s set for tdc1. I have the Deere manual it says if you put it at tdc1 your line on the injection pump should line up behind the window. My problem was that there was no line on the rotor but I...
  2. M

    John Deere 6359t

    Yes that what it looks like to me. Like what you said. yeah it ran fine without a load on the gpu but as soon as you would put a load on it it would bog down I tried to adjust the throttle but it didn’t help so we did the injection pump.
  3. M

    John Deere 6359t

    I was thinking something similar so I got it back tdc1 with both rocker arms loose on cylinder 1 and pulled the pump and rotated the injection shaft one full turn and put it back and it didn’t help. But I looked around YouTube there’s a injection pump repair place that has a channel and he said...
  4. M

    John Deere 6359t

    Hi I need some help a 6359. I did an injection pump on it. Before I pulled the pump I looked for the 2 timing marks you line up normally and pull it but the mark on the rotor isn’t there so I did some research and asked around and read that the dm4 pump with the key way you can just use the mark...
See more
Top