• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

nielv's latest activity

  • N
    nielv replied to the thread Hyundai Robex R200LC-9S Manuals.
    This is golden. Thanks so much Makar!
  • N
    nielv replied to the thread Hyundai Robex R200LC-9S Manuals.
    So, reviewing the serial plate again, the plate states the machine is a R180LC-9S/R200LC-9S
  • N
    nielv replied to the thread NielV.
    True that. We had to replace about a third of the machines hoses, and still we had aeration problems after the flush. Very important to...
  • N
    nielv replied to the thread NielV.
    Thats the main valve bank. We were busy removing it for repairs. We had a hydraulic hose and hydraulic pump failure on the machine, and...
  • N
    nielv replied to the thread NielV.
    With the Hard Rock Mining (Chrome and Platinum) where we are, the buckets are quite protected.
  • N
    nielv replied to the thread NielV.
    • 20231026_111447_resized_1.jpg
  • N
    nielv replied to the thread NielV.
    • 20231016_115919_resized.jpg
  • N
    nielv replied to the thread NielV.
    Thanks for the warm welcome. I have some pictures of Hydraulic flushes we did recently...
    • 20230510_153158_resized.jpg
  • N
    nielv replied to the thread Purchasing first TLB and need advice.
    Hi Magnus. My opinion, I tend to side with @crane operator regarding rather purchasing a good used machine, rather than a new machine...
  • N
    nielv reacted to crane operator's post in the thread Purchasing first TLB and need advice with Like Like.
    Well, I'm glad you found this place on the worldwide web. There is someone likely here, that's fixed whatever problem you come across...
  • N
    nielv reacted to crane operator's post in the thread Purchasing first TLB and need advice with Like Like.
    Warranty doesn't equal reliability, and I don't think the warranty matters if the dealer isn't close. Would the warranty include them...
  • N
    nielv replied to the thread Hyundai Robex R200LC-9S Manuals.
    Not according to the serial plate. It's stamped as R200LC-9S. It has the Mitsubushi S6S-DT engine in.
  • N
    nielv replied to the thread Bell Equipment- parts supply.
    Hi Michael. We are based in South Africa, not to far from Bell Equipment themselves. I do a lot of work on the B, C, D and E Series...
  • N
    nielv replied to the thread Bell Equipment- parts supply.
    Hi Mowingman. The Bell trucks being John Deere trucks are only true for the D series. They were also branded as Hitachi trucks in Australia
  • N
    nielv replied to the thread Bell30e recalibration of bin tip sensor.
    Extraction form the manual: 1. Make sure that there is enough room above the bin to be able to lift it fully. Look for any hazards like...
Show older items
Top