• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Recent content by Scaper

  1. S

    Case 580 Super K hazard light fuse keeps blowing

    Hello All, I have a Case 580 Super K and the fuse for the hazard/directional lights keeps blowing out. This seems to happen very randomly, sometimes it will go for a while without issue and sometimes it blows out right away. Replaced the directional lever since at first it seemed that was...
  2. S

    Case 95XT Fuel shuts off after releasing the key from the start position.

    Well, it came out the bottom, just like you said. I didn't need to remove the oil lube line. Once I turned it the right way it dropped out the bottom and was able to get the new one in relatively easy. Machine is up and running now. You saved me a lot of time trying to figure that out - I...
  3. S

    Case 95XT Fuel shuts off after releasing the key from the start position.

    It's been pouring here all day today, I'll take another look at it tomorrow.
  4. S

    Case 95XT Fuel shuts off after releasing the key from the start position.

    Does it come out the bottom somehow? Doesn't look like there is enough room to do that
  5. S

    Case 95XT Fuel shuts off after releasing the key from the start position.

    So I've determined that my fuel shut off solenoid is bad. Does anyone know if there is a way to replace it without removing to injector pump? I can't get the old one out from between the injector pump and the engine block
  6. S

    Case 95XT Fuel shuts off after releasing the key from the start position.

    I don't seem to have a relay like that. All the relays I have are are the normal 30A size. There is one there that should be for the fuel system, but when I unplug it with the machine running it doesn't seem to change anything - the machine keeps running.
  7. S

    Case 95XT Fuel shuts off after releasing the key from the start position.

    I'm having this same problem with my 95XT. My machine is doing this somewhat intermittently. If it shuts itself off it won't keep running if you try to start it right away, but if you wait a few minutes and then start it it will run for a little while before shutting off again. Does anyone know...
  8. S

    Case 580 can't get gland nut loose

    Thanks! I ordered a few sets from him today. His prices are significantly cheaper than other places I saw on line.
  9. S

    Case 580 can't get gland nut loose

    Anyone have any recommendations on where to get cylinder seal kits? I have one for this cylinder but need to do a few others. I see a lot of places on the internet selling them but I don't know if some are better quality than others?
  10. S

    Case 580 can't get gland nut loose

    I'm going to try this, thank you!
  11. S

    Case 580 can't get gland nut loose

    Yes, screw was removed - in fact I didn't both to put back in, I was hoping the vibrations of the machine might help loosen it up.....LOL
  12. S

    Case 580 can't get gland nut loose

    Hello all, I have a Case 580 Super K and need to put new seals in one of the stabilizer arms hydraulic cylinders. I have a gland nut wrench for Case cylinders and have tried using some long pipes to add leverage but this gland nut doesn't want to budge. Anyone got any ideas to get it loose? Thanks
  13. S

    Case 95XT Work/Tail Lights Not Working

    Hello all, I have a Case 95XT and my work and tail lights have stopped working. This is the only time of year I really try to use the lights since I use it for snow work, the rest of the year we only run the machine during daylight hours and don't need the lights. I've had this happen a few...
  14. S

    Komatsu WA 180-1 No power to Instrument Cluster and Won't Start

    Figured out eventually that the issue was a bad ground. Thanks for the advice none the less!
  15. S

    Komatsu WA 180-1 No power to Instrument Cluster and Won't Start

    Hello all, I'm having an issue with my Komatsu WA 180-1. I have no power going to the instrument cluster and the machine won't start. Batteries are new and fully charged. I have 24 volts going to the back of the key switch but I'm not sure how the wiring runs from there. I checked all the fuses...
See more
Top