• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Recent content by Snowbird

  1. S

    No start Bobcat E35

    I certainly will Uffex, One big Issue for Bobcat is that the ECU got the lack of signal from the pull relay when the start relay kicked in, turned on the fault light but did not send out to the console an error code. That is frustrating for anyone working on these units.
  2. S

    No start Bobcat E35

    Well it's a rainy day and I have time to dig deeper. I feel a little foolish but that's OK as long as I'm getting to the bottom of this. I did look through the 1000 page DF maintenance manual and did find the correct electrical schematic, I completely missed this the first look. Earlier...
  3. S

    No start Bobcat E35

    Thankswell Uffex, Really appreciate , . Here's a quick update; I know the pull and hold solenoid well from my Kubota tractors. So after I checked the fuses and replaced the relay to no avail I unplugged the solenoid, gave it a ground and then 12v to pull and left the hold on while I jumped the...
  4. S

    No start Bobcat E35

    Thanks Uffex, Kubota does use a common rail injection system so the schematic is close. I know the fuel system works fine the engine runs normal when I force the fuel shutoff solenoid open. So I'm dealing with an electrical problem. Today I'm going to check out the start relay but if that...
  5. S

    No start Bobcat E35

    Thanks for your reply, no I don't have a schematic, I bought the Service and Workshop manual and thought there would be a schematic but I guess you purchase the wiring diagrams separate and I have not found one available. I'm surprised that with the fault/error light on there is no code...
  6. S

    No start Bobcat E35

    Looking for any thoughts on what to check next. I have a 2011 E35 with a Kubota D1803 engine. I purchased this unit used in the fall of 2022 and did the 1000 hour service and etc... Has always started on the first half a crank until a few days ago on a job. I went to start it up and started...
See more
Top