• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Recent content by ThatGuysFarm

  1. T

    Engine only runs with full choke

    I have a Hobart portable welder that when it gets hot it loses fuel pressure and will die unless at full choke. I put a little clickity clackity 12v fuel pump in line that the rancher had in his shop, in a hurry to finish a job in the middle of BFE. Been working great like that for 17 years now.
  2. T

    Genie GS-3369 RT Won't always auto level

    I see. Ya mine just would beep like mad but still go up, and even when you shut it off while up and a tiny bit off level it would still beep. Yours must have more safety's on it.
  3. T

    Genie GS-3369 RT Won't always auto level

    I have an old rough terrian Haulette diesel. I just unhooked the level buzzer and use it. As long as you don't lift on a side hill its very stabile, I use to do a lot of grain bin work and most are sloped up to the bin. I would just drive straight at the bin, shoot up, push my basket out to the...
  4. T

    Spec creep and the disappearance of the 10-12 ton class excavators

    If it fits it ships.
  5. T

    Pump drive for Cat 3304

    The price can be a huge deal. The pump Rexroth was wanting to sell us was $8500! And we will need 3 of them, I found that Versatile is using a Rexroth pump with the same output that I can get for $1600! Then the adaptor machining and spline adaptors sourced out of Denmark were about $1000. So...
  6. T

    Pump drive for Cat 3304

    It's a 800hp farming tractor, supply chains have been a huge PIA! But we are getting closer.
  7. T

    Pump drive for Cat 3304

    What flange and shaft is the pump that was on here? I've been fighting trying to find load sensing pumps that would bolt up to a CAT drive box from a 773B haul truck, the CAT pumps that were on it were gear pumps with 2 bolt C-flange & C-shaft splines, but I found out when trying to install a...
  8. T

    Pump drive for Cat 3304

    SplineShop.com has some random hard to find hydraulic spline adaptors. We've ordered some stuff from them, it good stuff.
  9. T

    Any Cincinnati Mill Knowledge Here??

    We ended up getting this mill along with a older press break and radial arm drill all from the same place. The break and radial arm are hooked up and working fine, the mill we haven't been able to get going yet, I think it might be just a loose wire somewhere, but we haven't had time to get it...
  10. T

    Bore welding

    For the setup we have, yes. It only came with the lead and gun that fits the boring tool and rotates in the bore. The welder itself did not come with the Portable Boring Machine.
  11. T

    Bore welding

    The one we got came with an entire new lead and the gun that spins in the machine. We have not used it but with the adaptor that I found, which we have not gotten because we haven't needed to, it looks like we just take our lead off of our machine and unplug the lead wires, then hook the boring...
  12. T

    Bore welding

    We got a China Ebay special one. It was about 6K and it is still doing a good job. We had a local company do a bunch of boring for us and they charged 26K so I figured the gamble on a 6K machine was worth it. We've had it about 2 years and have bored quite a bit with it. The cutters and set...
  13. T

    Twin Disc Pitot Tubes?

    We will check them out. Thank You
  14. T

    Twin Disc Pitot Tubes?

    Anyone know where to get new Pitot Tubes for 2600 Series Twin Disc transmissions? Or know of a place that can or will build a replacement? I attached some pictures of one like we are looking for. Thanks
    • ThatGuysFarm
    • Thread
    • 2600 2600 series 2603 2606 2609 2610 peto tube pitot tube twin disc twindisc
    • Replies: 2
    • Forum: Shop Talk
  15. T

    Are CAT Hydraulic Pumps Special to CAT?

    Pump will run 1:1 with engine RPM so 2100max, and 3000psi minimum
See more
Top