• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. Z

    Delux cab on older new holland

    Sectioned 2” out of door and frame and reworked top lexan that covers opening and it fits well Powder coated door Installed late model vertical headlights, filled the power section with some federal signal dual filament impact lights for additional led lighting and strobe lighting in one
  2. Z

    Delux cab on older new holland

    Made an old lx 885 have a cab off a late model L185 vertical headlight machine. This is the garbage I got for free off a customer
  3. Z

    bucket tilting down

    What machine. One cylinder on tilt can be internally bypassing. Cap fittings and check
  4. Z

    New holland 190 cylinders on a 180

    just posting this for people to know, but older ls 190/lx985 boom cylinders fit ls180/lx885/865 machines perfectly no modifications needed, and could go vice versa in a pinch. Tilt cylinders are same between the two Rod and bore size are both larger on boom cylinders. Needed more lifting...
  5. Z

    John Deere 240(?) skid steer

    With finagling you can get a battery charger on the batt with the boom down.
  6. Z

    4 in 1 bucket

    in need of an 84” gp bucket. Do I spend a grand on a new regular bucket or do I invest in a 4-1? Are the factory Deere/cat/case buckets that much better than aftermarket ones? Worth buying a used oem style 4-1 for close to price of a new aftermarket? I’ll be low use on it, but will come...
  7. Z

    1845C Aux Hydraulics

    You steal power off hydraulic valve for boom, but you need to add a “power beyond fitting” when you remove a plug Then valve is front mounted at machine with a direct link pedal above it Done it once and used a donor machine, not a bad job. Ended up making a pivot pedal from scratch as it was...
  8. Z

    Loegering vts repair part #’s

    Actually turned mine around when I had it apart due to minor wear. You need to address your torsion tubes. Something isn’t correct. Your torsion busted or the vts is wrong base setup
  9. Z

    Loegering vts repair part #’s

    All rebuilt, greased and installed. Took me 38 minutes to jack up machine on solid tires to it on tracks ready to drive by myself. With a helper I could probably easily loose ten min off that.
  10. Z

    Loegering vts repair part #’s

    Bearing and seal numbers I have go right in, and work perfect One idler repaired for $175
  11. Z

    Loegering vts repair part #’s

    The crane makes doing mine super easy
  12. Z

    Loegering vts repair part #’s

    Had these on and off machine when first got them. Don’t know why on or off a pipe dream. Me as one guy with no helper installed both sides for first time in 45 minutes, swapping back to tires was a half hour
  13. Z

    Loegering vts repair part #’s

    Seal number. Hopes this helps someone
  14. Z

    Loegering vts repair part #’s

    So not sure why they say these aren’t serviceable. What a load of crap Actual bearing part numbers for idler SKF BS2-2208-2CS5/C4GEM9 Readily available Alternate number with slightly less visconsity grease is BS2-2208-2RS/VT143. Or 2cs Bearing is a 80x40x28 in metric Seals are 80x40x16...
  15. Z

    CAT 246 Engine repair

    Was really affordable
  16. Z

    CAT 246 Engine repair

    Find a Perkins dealer Recently installed one direct from Perkins off boat with slightly newer emissions as a running complete with fuel system for $6800
  17. Z

    Loegering vts repair part #’s

    Thanks for the info. People said they’ve rebuilt them but no luck in actual part numbers. Aprehensive to beat the seals out of a roller if I can’t even find a seal. Searched by seal size and found correct one by measuring. Ordered a pair and if they look right I’ll destroy my one removing it...
  18. Z

    Loegering vts repair part #’s

    Not worried about drive chains, asking a bout bearing and seal numbers
  19. Z

    Loegering vts repair part #’s

    have a used set of vts 86+ I picked up cheap. Doing some repair in them before install. All hubs are in good shape, cleaned up and repacked bearings and added grease zerks. Have two foreward rollers in need of repair. I have a pre 30,000 serial number so repair parts not available per them, but...
  20. Z

    Case 60xt counter balance valve unavailable. Cross this number?

    Well I see no one knows about this..... Numbers don’t cross to anything. Sun has no clue about it, not Parker **** Got a used valves assembly that had a different style counterbalance valve. Also got a new old stock entire valve Assembly
Top