• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. P

    2018 Bobcat S550

    Hi I have a 2018 Bobcat S550 SN AHGM14550 It has been giving the customer problems since it was new and had all sorts of people looked at it including the dealer but no one ever wanted to get involved with it. The customer said Bobcat remoted in a year ago and got codes - L7404 Gateway...
  2. P

    Gray Market Cat 308B SR sn 3YS

    Hi Im looking for the actual machine service information. I purchased from a person online and they couldn't follow thru. I have people tell me to use the 307B but it doesnt quite all add up. Just want a good electrical schematic for that specific unit. Also were are the relays located...
  3. P

    CASE 580SM Series 3 w/ Powershift trans

    This is in regards to the Powershift transmission 4 Wheel Drive. I have constant power at the 4WD solenoid approx 2-3 seconds after unit starts up. The way it works for those not familiar with system on any backhoe trans power shift or standard, 4WD Solenoid Powered = 2WD, Unpowered = 4WD. I...
  4. P

    Volvo A25D Brake Over Stroke Warning

    hey Volvo A25D Serial 15040 So I got some warning lights that came on. Apparently its a Stop light and another light and in manual indicated there is a Brake Over Stroke detected (Leak, Blown Line, Worn Pads, Etc) I was able to narrow it down to the front LH brake master/air chamber...
  5. P

    Komatsu PC228USLC-3

    Hi I have this Komatsu PC228USLC-3 Serial 20001 - up, It has no pilot pressure or hydraulics. It was working one day, next day they came back and nothing. I checked the safety switch in the left hand console, had power in and out as it should all the fuses and relays seems ok power to the...
  6. P

    Komatsu PC300LC-7, Arm In function loads up Hydraulics

    I have a Komatsu PC300LC-7 Serial 50161. What I do know is when you stretch the arm all the way out it does have a very very slow drift. My problem is when you stretch the arm all the way out and full stroke the joy stick all the way back, it goes about 1/4 of the way and the hydraulics seem...
  7. P

    IngersolRand TC13 service manual

    I need a service manual for a Ingersol rand TC13 walk behind trench compactor roller Let me know if you have or where I can find the information
  8. P

    Need service manual for IngersolRand TC13

    I Need service manual for IngersolRand TC13 walk behind trench compactor roller. Let me know if there is a source maybe where I can buy it and down load it
  9. P

    Kenworth with Reliance Dump

    I am trying to track down the cylinder seals for the gate (Gate lift cylinder). I called a reliance shop and the guy there said that its not easy to get the seals, and he would have to look back thru all sorts of old boxed infromation to find out the build and then go from there. I know the...
  10. P

    Bomag BMP851 Charging System

    Can some one shed some light on how the charging system works and how to diagnose it on a Bomag BMP851 walk behind/remote controlled roller? It has a diesel, not sure if duetz or hatz, i know its not a kubota. Any and all help would be greatly appreciated. thanks
  11. P

    Cat 315C L. Auxillary problem

    Didn't do anything. Thumb up ok with pressure. Thumb down with no pressure as if it's free falling but slowly. Wondering if maybe there a switch or setting between Uni or bi directional flow. Any input would be nice.
Top