• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. K

    Need lighter dump bed for a Chevy 3500

    Running a 2018 crew cab chevy 3500 daully, its a chasis cab model so it has increased bed length and stickered for a slightly higher gvwr with a 11ft steel dump bed with folding sides and a venco hoist, thing is a monster. It weighs way too much for this truck and takes away axle weight for...
  2. K

    Help removing final drive cover on John Deere 333g

    Would like to know how to remove the final drive cover on my john deere 333g. I am replacing the snap rings and seals. I believe I need to apply force on the cover in order to spin and unlock it but I don't want to ruin it. Thanks!
  3. K

    Deere 326e and 333g quick attach pins sticking

    Anyone have issues with Deere quick attach pins not fully releasing from attachments? I'm constantly getting things stuck because the lock pins don't fully open up, they stay sticking into attachments by about 1/2 inch. Both my machines have this issue.
  4. K

    Controlling an attachment flow rate with throttle? JD 333g

    Hi everyone, I have a john deere 333g and am possibly acquiring a used snow blower that uses 30gpm. My standard flow maxes at 25gpm and 40gpm on high flow obviously. I was curious if I can achieve the maximum gpm of the blower by running at a lower throttle with high flow enabled or am I risking...
  5. K

    John Deere 320D Foot control valve

    Does anyone know how to go about fixing a sticky foot control valve on the 320D whether its cleaning it, getting new seals, or a whole new block or rods. The issue is when trying to lower the boom it sticks too much and when you finally press it to the point it moves it goes hard to the ground...
  6. K

    Repairing a Takeuchi TB025

    Hi everyone, looking to start repair on my 1997 Takeuchi TB025 this spring and want to have everything prepared. I have already done all of the oils and filters, all new seals in all cylinders excluding the push blade, a new water pump, new thermostat, and cleaned out and flushed the radiator. I...
  7. K

    Towing a John Deere 333g

    Hello everyone, First post but have been learning and gathering info from the forums for about a year now. Anyways, I went ahead and reserved a JD 333g CTL to start a hobby farm in remote northern Minnesota and it will be available in about 2 months, my problem is I currently don't have a...
Top