• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. Adam Walden

    Cp-563C

    I have a c model 563,I changed drive pumps and hydraulic pump and drive motors on this machine.got it all buttoned back up and have a no start situation, I checked all fuses, checked power to starter solenoid, I checked relays to neutral safety switch and parking brake. It ran when it came in...
  2. Adam Walden

    Terex hml 42 wheel excavator

    I have a terex hml 42 wheel excavator,I can't get any of the hydraulic functions to work except the wheels will turn, I checked power to the safety switch on the arm rest and it was good, and traced all wires to the fuse panel and all fuses were good,is there any solenoids that could keep...
  3. Adam Walden

    New Holland 555E

    I have a new Holland backhoe that will not take forward or reverse, I see the wire going from the selector goes to a fuse panel on the right side fender well, but does it go from there to a solenoid or a module, if any one has a schematic or anything would be helpful,I can't get the serial...
  4. Adam Walden

    Equalizer bar 953D

    I have done several equalizer bars on B models and C models but this is the first D model we have encountered. The center pin hole had to be line bored and in order to do this we had to remove the pumps and the fuel tank. Anyone else ran across these, or have a print out on on how to do this...
  5. Adam Walden

    3116 engine

    Can someone get any good info on setting the rack and injector timing on these engines?I have tried my ass off to get good material on this for a while now, thanks in advance
  6. Adam Walden

    953C 2nz serial number

    I just have a quick question, to change the fuel sending unit do you have to remove the fuel tank?
  7. Adam Walden

    Champion 710A

    I have a champion 710A in my shop, it will not take any gear. I pulled the strainer in the trans, it didn't have clutch material or anything that would lead me to believe I needed tu pull the trans, the owner said it would move when he parked it a couple years ago. I checked the pressures on the...
Top