• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. M

    John Deere 50D mini ex injector install

    Idk I put them at 20ft lb , see what happens
  2. M

    John Deere 50D mini ex injector install

    I was just surprised how easy they set in after how hard they came out. Put them in, seems hold downs crush the washer or push into place as I tq down the hold down. Yes they were SEB injectors that came out. JD # MIA883396
  3. M

    John Deere 50D mini ex injector install

    I thought the book said 24-29 nm. I'll double check this morning
  4. M

    John Deere 50D mini ex injector install

    All 4 cylinders are the same. Does the hold down just hold it in?
  5. M

    John Deere 50D mini ex injector install

    i have a jd 50D #1FF050DXJA0275408 has a yanmar engine #4TNV88-BPHB , i went to put new JD SEB injectors in with new washer and tip isolator, the new injector slips in with ease. Is that how they go in? for some reason i feel there should be some resistance going in? old ones came out really...
  6. M

    John deere idling problems

    What ended up being the problem? Idle motor or the switch in cab? If I unplug idle motor I will start then have to plug in but doesn't go full throttle. Roughly half. Have to have auto idle switches in off position
  7. M

    Hypac C840c

    I did, but it took some time and research to find part. So hopefully it will help someone with similar problem.
  8. M

    Hypac C840c

    I was able to find a solenoid that fit like original, 750$ thru the Hyd shop I use in my area. Ran roller for 1.5hr and hi and low both work now without stopping. Glad I didn't go the $13k pump route before trying to find a solenoid. Here's a pic of Part I used
  9. M

    Does CAT pin on bucket fits the same from 938 - 980

    No! 950 to 962 the bucket mount is quite different in size
  10. M

    D5G parking brake won’t disengage

    According to the dealer they pulled motor to replace drive coupler. It was a expensive job, 13k $ I probably should've tried to do it myself but didn't really have time
  11. M

    D5G parking brake won’t disengage

    I'm not trying to cut in on you suggesting how to go about finding a fix. I enjoyed learning the steps to testing. Just time consuming. It was still cheaper then having cat drive out and charge 2k to diagnose. I also could've spent all month doing the coupler and it still would've been cheaper...
  12. M

    D5G parking brake won’t disengage

    No signs. Just came to stop and park brake light was on. I didn't realize there was a separate pump that ran the blade. So I thought pump was fine and proceeded to test and change sensors. After that still nothing next test was the hyd port test. No fluid, no psi. Coupler no good. 7800hrs on...
  13. M

    D5G parking brake won’t disengage

    Sounds like what I went thru a month or so ago. I think I would advise to check the hyd ports to make sure they have oil PSI to rule out pump coupler. Else for less experienced people they may not know how to go thru and test all the sensors.
  14. M

    Hypac C840c

    Nothing? Nobody has any info on this brand pump?
  15. M

    Bomag bw 120 ad-3 not moving

    I have a Bw120 AD4 and had same issue. Turned out to be a bad shut off switch on dash. Water got into it and it wouldn't move like brakes were stuck on. Just happened to find it by taking dash apart while running and messing with wires to switch and fwd/rev handle and it moved. Put new switch...
  16. M

    Hypac C840c

    So I'm having problems with the vibrator , I changed switch, changed relay, what I've narrowed it down to is the Magnet valve/servo valve, the hard hit doesn't work, hasn't worked in yrs, before I worked at this company. Well the short wave, low on vibration switch stops working after about...
  17. M

    Tool prices are stupid

    I pay for whatever I buy off Snap on truck when he comes, I need something I buy it.. I told him to stop coming till I need something. Its the same **** on the truck that I already have. I can't keep buying a ratchet every week he shows up just to buy something
  18. M

    D5G XL Park brake came on when using

    Thank you! So far so good U are a great help here
  19. M

    D5G XL Park brake came on when using

    I got it, the page u gave me yesterday shows the colors and 1234 in plug where they go in plug
  20. M

    D5G XL Park brake came on when using

    New sensor is white, blue, black, brown. Machine plug is brown,blue, blue, purple.
Top