• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. R

    need to buy a good underground utility locater ?

    Call your local locator service, 411 is the number here. They locate and if you hit something it is on them. Someone hit a three quarter inch gas line feeding a house prior to calling 411. The bill was 3500.00 Luckily, they were able to get the bill reduced to 500.00 If someone had callled 411...
  2. R

    Sprocket ware

    I have seen on this board someone used a 2 x 4 to detension the tracks to make it easier to remove tracks, Wish I could point you to a thread but,,,
  3. R

    Sand blasting info needed.

    It has been mentioned several times but Respiratory Protection is one of the highest priorities you should be concerned with. Once that crap gets into your lungs, do not think you breathe it back out.
  4. R

    Replacing halogen with leds

    Unfortunately I can not figure this out,,, here is the description that Amazon lists----Nilight 4pcs LED Pods 4 inch 60W triple Row Flood Spot Combo 6000LM Light Bar Driving Fog Lights Off Road Lighting. They are 35.99 for a 4 pack or 17.00 for a 2 pack. See if this is helpful.
  5. R

    Replacing halogen with leds

    If you walk me through how to post a link, I will try. I am computer stoopid. Or you can send me a Private Message with cell phone number and I can take a picture off Amazon and forward it to your phone.
  6. R

    Replacing halogen with leds

    I double checked Amazon and the ones I ordered and received are 6000 lumen. They have 5 LEDs across top and 5 across bottom with 10 in the center, total of 20 LEDs. They are spot and flood. If I could figure out how to give you a part number I would, They cost 35.99 US
  7. R

    Replacing halogen with leds

    I purchased a 4 pack of Nilight from Amazon for about 35 dollars. They are 4 inch cubes, they put out a good light pattern and have about 15 LED's in each cube. They are listed as 60 watt and 6000 lumen and I like them. For 35 dollars, if you do not like them u did not throw away much money...
  8. R

    For Sale== used muffler for 2006 Cat D3GLGP Dozer

    Muffler was hit by branch and up pipe broken, has been welded, if interested I will send pics. I guess will fit other dozers also? Located in Central Ms, shipping would be expensive I am sure. Thank You
  9. R

    Ford 2600 tractor stuck clutch.

    Did you have the clutch pedal pushed to the floor while you were hitting the brakes?? Is the clutch disengagement device==cable or hydraulic== operational? Sometimes you have to be rough with the brakes and more than once for it to break loose.
  10. R

    Cat D3GLGP NO SPEED CONTROL

    As per usual, Nige is going to do his best to help, He is an exceptional wealth of knowledge and was very helpful to me and everybody else. Thanks again Nige!! PS I also have a D3G lgp. Mine ended up with both track speed sensors replaced and calibrated. Let Nige guide you through the process...
  11. R

    Radiator leak

    Keep a CLOSE watch on it and good luck
  12. R

    What air compressor?

    I am not sure what you are asking but I use my leaf blower.
  13. R

    1997 Cat 416C first time buyer advice

    If you are not very well versed in heavy machinery, like me, HAVE someone go with you that is knowledgeable and you trust their opinion, even if you have to pay them for it. Hydraulic hoses are not cheap to replace and generally you do not replace them one at a time when they break because they...
  14. R

    Uh-oh.. Hydraulic Line Failure Under PC60-7

    I have had 02 heart attacks with 02 stints being placed in 02 days. Blood thinners SUCK!!!! Heart attacks were due to genetics which took my Dad out at 51.5 years old and I was 9.5 Be careful shaving, You will be fine.
  15. R

    1987 c7000 body panels

    There are three withing 60 miles of me, stupidly I did not check were OP is located--- Brain Fart or Old timers disease is my excuse of the day. Come visit and you will see. Open invite
  16. R

    1987 c7000 body panels

    I am cheap, check with your local Pull a Part or some other type of salvage yard or truck dismantlers. Every time I go I see something cool I have to get, would be a lot cheaper than ordering new parts if you can get what you need/want.
  17. R

    Uh-oh.. Hydraulic Line Failure Under PC60-7

    If you or anyone else decides to just sit down and let things go, have everything lined up within 6 to 12 months so your family will not have to deal with it. Shorter saying, PRESS ON
  18. R

    Cat D3k2 Saving settings

    Jeopardy theme music playing heh heh heh
  19. R

    Cat D3k2 Saving settings

    Nige is awaiting your info to be able to provide good info. He has helped me tremendously as well as many many others. Nuff said.
  20. R

    ANOTHER WHAT KIND OF TOOL IS THIS

    I will try,, leading paddle-- used for applying/smoothing lead to car bodies many years ago. Did I win??
Top