• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. Freedom6178

    67 580 CK loader wont lift backhoe wont lift???

    THANK YOU oldseabee :notworthy that did the trick. And I'm pretty sure what o-ring is bad. Now that everything works again, I'm seeing the main boom lift cylinder is leaking down faster than ever. I figure only part of that o-ring came apart. I'll try to tear it down this weekend and see if I...
  2. Freedom6178

    67' 580CK cylinder leak questons+

    OK here is the number stamped at the bottom of the cylinder itself DK10075. I have a photo on my phone I'll upload later. I saw no numbers on the Gland-nut it's self. the model number of the hoe is 4139673. Thank you for the reply's.
  3. Freedom6178

    67 580 CK loader wont lift backhoe wont lift???

    Well, I replaced the filter and topped off the fluid this weekend but still nothing working :( (I was hoping that was the issue). I had started to back out the relief screw and was counting only got to 2 turns out then thought I might not wana do that so I set it back (remember I'm a bit new to...
  4. Freedom6178

    67' 580CK cylinder leak questons+

    Hi again sorry for the long delay between posts, The problem with this cylinder is it is a replacement from 2" to 3" and is not OEM. The guy i bought it from said it was common for the end of the 2" to break off so he had it replaced with a 3" :beatsme ? I'll see if i can find more info this...
  5. Freedom6178

    580CK Oil dipstick

    I did look at those two places and generally thru the internet. I thought it'd be an easy one, haha old Mach = harder to find parts. I have the dipstick almost repaired I just replace the center piece of metal I'll post some Pics later once its done. Thanks
  6. Freedom6178

    67 580 CK loader wont lift backhoe wont lift???

    Hey guys I'm having an issue with my 580ck. I was using it to transfer some dirt from my pond I just dug to our trail ends :D . OK so what would have been the second to last run I had it in 3rd gear low (std clutch) and kinda gave her (full throttle) only for a half a min or so to get to the...
  7. Freedom6178

    67' 580CK cylinder leak questons+

    Sorry for not replying for so long the tractor is about 3.5 hours away. Where would the the number be stamped? As i recall there are a few different numbers stamped on the casing of the ram at the gland end. Some numbers are stamped deep some others are running the other direction but almost...
  8. Freedom6178

    580CK Oil dipstick

    Hey guys I changed the oil on my 580 last weekend and when putting the dipstick back in it broke off just below the 2nd o-ring. I was wondering if anyone knows of a place that might make a replacement? I found a place that sells used ones but they are out of stock. If I cant find one I'll...
  9. Freedom6178

    67' 580CK cylinder leak questons+

    I have another quick question. Does any one know about what size the oring should be for the gland i have pictured thats the outer one there. The cyclinder its self is 3". Thankks in advance.
  10. Freedom6178

    67' 580CK cylinder leak questons+

    Tinkerer I did buy that wrench this week. Will try it this weekend. Looks sturdy enough 3/4 drive too. Thanks will let you know how it works out.
  11. Freedom6178

    67' 580CK cylinder leak questons+

    OK cool thank you.
  12. Freedom6178

    How Did You Find Us?

    I found this site looking for info thru google for the 580CK. Been reading for days lol.
  13. Freedom6178

    Case 580ck - 188cui - non oem oil filter

    I thought so Just figured I'd ask. Thank you. :usa
  14. Freedom6178

    Case 580ck - 188cui - non oem oil filter

    I know the last post here is kinda old but i have a 67' Case 580CK. I was wondering sence the PH8A fits does that mean the Motocraft FL-1A fits too? I have seen these filters all disected and was kinda imprsess with the motocraft filters not the best but far better construction than Fram. I run...
  15. Freedom6178

    67' 580CK cylinder leak questons+

    more ???'s If i recall there should be a screw or a bolt holding the gland nut from unscrewing is that correct? I didn't see one on there anywhere? Or is this a different type of cylinder? Also another question If I were to remove any of these hoses that are leaking will fluid keep pouring out...
  16. Freedom6178

    Looking at buying this 580B Construction King

    I just bought a 67 580 CK non power shuttle for $6200 tho the motor has had some work rebuilt injector pump and the head was rebuilt. I love it best money I've spent in a long time. She needs some work, few hoses and a few cylinder rebuilds. but seems strong enough. Good luck with your decision:usa
  17. Freedom6178

    67' 580CK swing drift

    OK. Thank you both for the ideas. The machine in up north in the UP of Michigan so I wont be able to try anything till this weekend. Have off all week so hopefully I'll be able to figure it out. Thanks again.
  18. Freedom6178

    67' 580CK swing drift

    I thought too it was just slop at first but it doesn't stop traveling back it will swing back to almost center if i let it tho i only let it swing back till it bumped the stump i tried this in another area of the yard and the same thing:( I'm pretty sure I had the hoe pretty level. If i swing...
  19. Freedom6178

    67' 580CK swing drift

    While learning in the woods this weekend I was trying to swing the hoe to the left to dig around a stump but after the swing the hoe drifted back to the right seemed to stop (bounced i guess would be more accurate) it again drifted back to the right. If i swing the boom all the way left it will...
  20. Freedom6178

    67' 580CK cylinder leak questons+

    Thanks Alrman!! I had tried the search but didnt find what i was looking for. The one you linked 2nd is exactly what i was looking for.
Top