• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. P

    1650 Cockshutt (Oliver) Power loss then quits running.

    I don't know the exact fuel system on your machine and the location of filters and how the style of lift pump however if it's fairly normal: If the above post from thepumpguysc doesn't make it run. Take a clean Jerry can of fuel and set it up a few feet minimum above the engine. Start the...
  2. P

    580B filter cross list Help

    I've lost my updated list of what I found when I pulled it all apart. Can anyone correct and add to this? S/N 5230981 (1972) Diesel, Power Shuttle Hyd element.... unknown. Lf3530 (LF3313) (PH8a) Engine Oil FF223 Fuel P3319 FF224 Fuel P3318 AF 437KM CAK253 Air...
  3. P

    580B Rockford PowerShuttle - Stumped and missing Phil!

    Lee, You will want to read all of this: https://www.heavyequipmentforums.com/showthread.php?19055-Case-580B-shuttle-pump
  4. P

    Need help with 1973 580B shuttle

    If a person wants to do it the "book way" I found a post on here a long time ago and I saved the instructions but unfortunately not the name to give credit to it. Anyways here it is: To get the suction screen out from the top: If you decide to tackle this job, there is quite alot of stuff...
  5. P

    Need help with 1973 580B shuttle

  6. P

    Case 580B shuttle pump...

    You should read the whole 10 pages of this thread. I posted photos and measurements on the last page in 2013. Mike. https://www.heavyequipmentforums.com/attachment.php?attachmentid=108416
  7. P

    Case 580B shuttle pump...

    Great. You may want to clean the screen off again after you've ran it for a few hours. Have a look at the "clean" oil you just drained and decide if you're going to pour it back in or change it again.
  8. P

    580B How to get get the crown gear shaft out

    That's too bad, I was thinking there was a way to get that crown out without pulling the wheel and final drive and that would let the side gear and thrust washer on the left come out. As I was saying, the side gear and broken thrust washer on the right side is out on the bench but I'm trying to...
  9. P

    580B How to get get the crown gear shaft out

    While getting the brakes working on this new to us 580B we noticed no carrier bearing preload (some slop) while the brake housings are off so we removed the top cover under the seat to get access to the crown and bull gear compartment and took the bearings out of both sides. We wanted to...
  10. P

    Case 580B shuttle pump...

    Brian, what's the history of the machine... did it just stop one day or has it been getting worse? What does the oil look like? If it's all good I'd sure take a look at the "disconnect linkage" and it's measurements found earlier in this thread around post 51. You can verify all this with the...
  11. P

    Case 580B shuttle pump...

    I did 3.5 inches and 3 would have been better. I'll try to attach a picture. You won't believe the stuff you're going to pick off that screen. If your oil is contaminated you're going to use lots of oil (or diesel) whatever in order to get it clean. Even with cranking it and idling for a few...
  12. P

    case 580 b

    In my case this is a new to me machine and have not even picked it up yet. I got it going and I can't make it do it's no move problem (in the 10 min I've ran it) but that is the complaint from the previous owner.
  13. P

    case 580 b

    This is the exact question that I signed up here to ask. ..... I'm watching with interest. Mike
  14. P

    First Post Test

  15. P

    First Post Test

    123
  16. P

    First Post Test

    test
Top