• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. O

    Case 1840 was cranking over now just clicks

    First winter with this new to me skid steer and I went to start it today to push a little snow. It was around 25 degrees out and I’ve had it start before in the mid 30s but never tried this cold. It cranked over for almost a minute and almost started. I then decided to plug it in but only about...
  2. O

    Is this a sign of a bad injector?

    I have a 2004 Lull 944e-42 with a 4 cylinder diesel engine. Once at operating temperature and you are closer to or at full throttle it will sputter, lose power and kick out a lot of white smoke with a faint bluish hue. It will not do it all the time as there is times I can use it the entire day...
  3. O

    Is my hydraulic oil too hot?

    Just curious as I’m new to my Case 1840 as I’ve only owned it a few months. Last night I was working it a bit harder than usual. I had to climb out as it was running and placed my hand on one of the smaller steel hydraulic lines that go across from one lift cylinder to the other. I noticed it...
  4. O

    Case 1840c do I have a bad tilt cylinder?

    Removing some fill and grading for a concrete slab at home and suddenly the back drag felt very weak and noticed the tilting felt strange. The hydraulic filter light started blinking and sometimes would be solid a couple hours prior so I figured maybe I had a clog? I planned on getting a new...
  5. O

    JLG 2033e won’t move

    Recently acquired a JLG 2033e scissor lift and was working fine then stopped driving. It steers and goes up and down just fine but will not move. Batteries are at 100 percent. When I push the button to drive the green light indicator will immediately go out once I move the joystick and I have to...
  6. O

    1996 Case 1840 attachment wedge/pin help

    Just purchased a 1996 1840 to do work around my 8 acre hobby farm I just bought. Purchased from the original owner who just had it on his farm and certain things were repaired well like farmers sometimes do. One of the attachment pins must have broke and a large piece of threaded rod was...
  7. O

    JLG Lull 944E-42 will not accelerate or move in cold weather

    Hello, the company I work for bought a 2005 or 06 944e Lull this past summer. It worked great all summer. A few days in late fall it got down to around 35 degrees it started acting up a bit. Driving it seemed to have a loss of power and surge. After driving it awhile the problem would go away...
Top