• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. R

    JCB Servo Pressure

    Has anyone replaced a Start Up Valve in a JCB loader? It’s used to divert servo pressure to tank on start up. Having an issue with no servo pressure and I’m thinking that could be the issue.
  2. R

    JCB Wheel Loader Inop

    Hello. I have a 2009 JCB 436Z. Recently the hydraulics quit working for the loader arms, bucket and auxiliary. Joystick feels soft like there is no pilot pressure. Joystick enable switch has power and appears to be working. I have steering and drive. I’m not too familiar with these...
  3. R

    Genie Perkins Regen Issue

    I have a Genie S-45. 2014. Perkins 404F-22 Only runs for 30 seconds. Shuts down with 3719 code for high soot level. Soot level while running shows 3% full. Just got the machine so I don’t have history on it. Not too familiar with the Perkins. I’m used to the Deutz. Any experience with this?
  4. R

    Bobcat V417 Hose Leak

    Need to address a leaking hose that is in the center carriage of the machine. It seems almost impossible to get to. No access covers in the area. Anyone done any work on these and have to remove the cab or engine and enclosure? Hard to believe this was made with such terrible access.
  5. R

    Bobcat S250 Lock Out Issue

    Thanks for the response. Going to look into this further. Appreciate the help
  6. R

    Bobcat S250 Lock Out Issue

    Yes that’s correct. When it locks up, the pedals and spool valves still move. No error codes on the machine. This one has me puzzled. I’m not super familiar with Bobcat machines. It is low on hydraulic fluid. I am going to top it off tomorrow. I was doubting that there would be a sensor that...
  7. R

    Bobcat S250 Lock Out Issue

    Do these have a sensor for low hydraulic fluid to lock out the arms and bucket?
  8. R

    Bobcat S250 Lock Out Issue

    I have a Bobcat S250 with an intermittent issue. The loader arms and bucket will lock out at times. The coil and valve for the interlock has been replaced. (No change) When it does lock out, the valve spools still have travel. 14volts at the interlock valve even when it is locked out. Any help...
  9. R

    Bobcat S250 Hydraulic Problems

    Have a bobcat s250 with a power bobtach. After using the bobtach, sometimes the hydraulics go crazy and the foot pedals will control the bobtach levers. If you do nothing, the levers will close on their own, foot pedal will open them. Anyone had this issue? I’m assuming the valve/solenoid is bad...
  10. R

    Transporting a Cat Forklift

    I believe they’re designed to be laid on its side. I’ve seen them palletized this way.
  11. R

    Transporting a Cat Forklift

    Thanks. I’ll look into renting a hydraulic trailer. Otherwise it’s getting tipped on its side again. Thanks for the help
  12. R

    Transporting a Cat Forklift

    Hello I need to transport my Caterpillar NRDR30 forklift to another location. The mast is 12’3” so the machine needs to be laid down I’m assuming. Does anyone know which side these machines are laid on? Thanks for the help.
  13. R

    Lull 844c-42 Hydraulic Surge

    Heres what I got so far. Put a pressure gauge on the accumulator. Builds to roughly 1600 psi and drops to roughly 1000 within a second or 2. Keeps cycling back and forth. Also the pilot pressure seems slow to build after machine has sat for a while. One thing I found interesting is that the...
  14. R

    Lull 844c-42 Hydraulic Surge

    Appreciate the help. I’ll do some checking.
  15. R

    Lull 844c-42 Hydraulic Surge

    Thanks
  16. R

    Lull 844c-42 Hydraulic Surge

    Thanks for the reply Lull 844C-42 Serial# 97W14P22-745 Going to check pressures tomorrow once I look up specs. Is the accumulator something that can be recharged or just replaced? What is ROL? Thanks
  17. R

    Lull 844c-42 Hydraulic Surge

    I’ve searched and found lots of people having the same issue but haven’t found a solution. ‘92 machine. Hydraulics surge about every 3-5 seconds. A few of the hoses get rigid. Few posts have suggested a new accumulator. Has anyone had luck with that solving the problem? Thanks for any input.
  18. R

    Genie TZ-50 Towable Boom Lift

    I would be willing to pay you for your time if you were still able to get some pics of that. Thanks
  19. R

    Genie TZ 50 Towable Pics Needed

    Anyone have some detailed pics inside the upper control box. It’s a 2012 model with the big push buttons. Just bought the lift. Apparently the box got smashed. Trying to get the new one wired up but the wires are so sun faded that it’s hard to get this one figured out. Thanks for any help
  20. R

    Genie TZ-50 Towable Boom Lift

    I would really appreciate that. Some pics of the inside of the upper control box. Thank you very much.
Top