• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. J

    2005 John Deere 410G - No Forward, Goes reverse in neutral and Reverse

    Well, based on your comment about the park brake and pin C have no connection, I had another look at the harness. Sure enough, when I started spreading wires apart at the plugs behind the gas pedal, the casings started crumbling. There was quite a few wires with copper showing! its a wonder...
  2. J

    2005 John Deere 410G - No Forward, Goes reverse in neutral and Reverse

    When I unplug the timer relay mounted on the fender, the voltage stays the same at pin C. I tested the diode and it is working. It reads .54V and then nothing when the polarity is reversed.
  3. J

    2005 John Deere 410G - No Forward, Goes reverse in neutral and Reverse

    Did you mean TM1881? I will buy it, but I wanted to confirm that this is the correct one. Yes, I get voltage at pin C of the 4 pin connector when the FNR is completely disconnected. When the park brake is turned off, I get voltage to pin C. If I have the park brake off when I turn the key to...
  4. J

    2005 John Deere 410G - No Forward, Goes reverse in neutral and Reverse

    I have the FNR switch all apart and from what I can tell, all the components seem to be fine. Diodes check out fine, micro switches work as expected. That looks to be pretty much it. I am hoping you can give me some info about pin C on the 4 pin connector. The second I release the park brake...
  5. J

    2005 John Deere 410G - No Forward, Goes reverse in neutral and Reverse

    I really appreciate you putting in the time to give me a hand with this! I will be away for a few days and then I might take the lever apart to see if there is anything repairable before I buy a new one. I'll post the results when i get it up and running!
  6. J

    2005 John Deere 410G - No Forward, Goes reverse in neutral and Reverse

    The 4 pin connector reads as follows: F - Voltage in B and C N - Voltage in D and C R - Voltage in C The 5 pin reads as you said for 1st, 2nd, and 3rd, but in 4th it is B, C, D
  7. J

    2005 John Deere 410G - No Forward, Goes reverse in neutral and Reverse

    With E-Brake on: Pink - F (11.0V) - N (11.2V) - R (10.1V) Tan - F (0V) - N (0V) - R (9.1V) With E-Brake off: Pink - F (10.4V) - N (10.5V) - R (10.3V) Tan - F (10.3V) - N (10.3V) - R (10.3V)
  8. J

    2005 John Deere 410G - No Forward, Goes reverse in neutral and Reverse

    That is how I had it hooked up, but I think my meter might not be working for amp readings. I tried another but same story. I had a friend with a snap-on power probe give it a try and it came up with some odd readings. If I start in neutral, then shift forward, and then reverse I get these...
  9. J

    2005 John Deere 410G - No Forward, Goes reverse in neutral and Reverse

    I'm pretty sure I followed your instructions correctly, but I am not getting a reading in any position... I used the F12 fuse seen here - http://manuals.deere.com/omview/OMT166701_19/CED_OUO1079_455_19_13JUL00_1.htm
  10. J

    2005 John Deere 410G - No Forward, Goes reverse in neutral and Reverse

    Hi mg2361, and thank you! it is T0410GX908971 It has powershift (no shifter on the floor). when its in reverse, it shifts gears fine.
  11. J

    2005 John Deere 410G - No Forward, Goes reverse in neutral and Reverse

    My 2005 JD 410G back hoe stopped going forward. I moved it about 50 feet and it ran strong and accelerated normally. I stopped and put it in neutral and turned the e-brake on. I then turned the e-brake off and shifted into forward and nothing happened. It also goes in reverse when I have it in...
Top