• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

cmark

  1. S

    140H Grader VHP Plus Gear 1,2,3 Not Working

    Hi Everyone Good Morning Actually My grader 140h’s gear number 1,2,3 is not working properly Sometimes i get pressure in no 3 (Reverse) Sometimes in no 1 and sometime in no 2 I repaired the transmission i changed the valve There is no code in ETA Main pressure is ok Sometimes is give me...
  2. C

    943 question

    I started my machine this morning it’s about 30 outside lows in 20s last nite I haven’t run it in 3 weeks . I let it warm up until water was around 150 just brought from idle to about 1/4 throttle just to move to barn and machine moved just fine let it sit and warm up some more then went to move...
  3. F

    Cat 980h itching pedal and ride control not working

    Please help, our Cat 980h itching pedal and ride control are not working. I put the ET the other day and it detected that the itching pedal and the ride control are not programmed. Someone came to programme them but it didn't work and he suggested that we change the Transmission ECM. We replaced...
  4. F

    Cat 988H,

    I removed a transmission from 988H to change the mounts. I fitted back the transmission and all the oil lines. I topped up the transmission oil using the quick fill but it took a while to show on the side glass to the full mark. I walked away to do something else but when I came back the oil...
Top