• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

crank no start

  1. F

    Pc27 no power to fuel shut off solenoid after machine randomly died while working

    I have read in a few spots that there is a diode associated with the alternator going bad that will not allow the machine to start. My question is, when the alternator/diode goes bad does it automatically off the power to the fuel shut off solenoid to prevent t the engine from running? I have...
    • freeman62
    • Thread
    • bad alternator? crank no start no power at fuel solenoid
    • Replies: 3
    • Forum: Excavators
  2. A

    Cummins qsb 4.5 no start

    Got a cummins qsb 4.5 in jlg telehandler with a crank no start issue. Codes active for 4 fuel injector drivers and air flow. Can anyone help with the steps to troubleshooting also a wiring schematic and ecm pinout to troubleshoot if possible
  3. J

    NPR no fuel to the injectors

    Hi I am hoping you diesel/npr experts can help. We are getting fuel to the fuel filter and to the injection pump but not to the injectors. The fuel solenoid is getting power. Below is the whole story for context because we did get it to run. 2003 NPR sat for about a year, mechanic unstuck...
    • JmooreNPR
    • Thread
    • crank no start fuel solenoid injector pump npr
    • Replies: 5
    • Forum: Trucks
  4. A

    JLG telehandler no start issue

    Got a JLG with a cummins QSB4.5 engine, so the engine radiator was pressure washed, machine started and moved a short distance and shut off, started back after trying for some time would idle then shut off under load, now it doesn't start at all. Active codes for all injector drivers and intake...
  5. F

    Ditch Witch MX-27

    I have a 2004 ditch Witch MX-27 with a yanmar 3d82ae engine. Was losing power to operate. Found out it was in the tank. So got that problem fixed, fuel injectors unstopped. Then replaced the starter. But now, I have a crank but no start. Getting no fire to the #1 fuse, which the manual refers to...
  6. W

    2020 Cat 299D3 CTL S/N: DY902297 - looking for electrical schematic - E459-2 problem, crank no start, no CAN comm

    I've researched the issue here and found some info with this problem on various other machines, but none specific to this vintage. I was able to find a schematic online, but it was for machines DY9891-UP and it appears that the ECM is in the engine compartment on this model rather than under...
  7. O

    Cat 4.4L. 320d fuel injection pump. fuel system problems!

    Hello guys! This is my first time posting so bear with me. ENGINE SERIAL #44407550 - I have a 2010 caterpillar 4.4L that is kicking my butt. Engine is in a brush bandit 250xp woodchipper. The engine currently is a crank no start. I have no codes. Engine WILL run on starter fluid, so I know my...
  8. T

    Cat 299d2 crank no start

    Hello, I have a cat 2016 299d2 that cranks but won’t start. No codes showing. Has 1048 hrs Was running down the road from the neighbors and it slowly shut off in middle of the road. Suspected it to be the fuel filter but it is not the case. I have changed both, primary and fuel water...
  9. D-bird

    2013 NH L223 crank no start, fuel solenoid

    Good evening! I have a 2013 NH L223 with about 1,400 hours. It’s been running great for me, until recently. Had to replace a battery because it would be too low to start in the cold after only a few days sitting. After replacing the battery, using it to move bales, it would occasionally stall...
    • D-bird
    • Thread
    • crank no start fuel solenoid l223 new holland
    • Replies: 4
    • Forum: Skid Steers
Top