• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

d5k

  1. P

    D4K travel speed drops to minimum under load

    I am working on a D4K, SN: MM00277, that equals shows both track speeds to what seems like minimum when pushing. If the operator goes to neutral and back to forward or reverse it immediately recovers. Pump charge pressures are well within spec. If I unplug the hydrostatic drive pressure sensor...
  2. R

    d5k temperature

    Since I bought my machine I was in doubt if there was any problem with the engine, thermostatic valve, as it always rose in temperature. So I changed the thermostatic valve, washed the radiator, checked the radiator helix belt, nothing worked. So I put the device on and forced the machine for 2...
  3. R

    error cod d5k

    I have the following errors for my 2011 Cat d5k. It was running normally until it turned off 2x so I turned on the water fuel light along with the red warning. But the water separator sensor was never connected as it broke the sensor fixing pin. It was never connected to the filter. 172-01...
  4. R

    d5k problems

    I'm having some problems with my 2016 cat d5k xl. she is about 4,500 hours old, she started to heat up a few weeks ago and since then i've been washing her radiator every week, until it didn't solve the problem anymore. This week she turned on the red warning light on the dashboard, but no beep...
  5. R

    2013 D5k

    I have a D5 that sometimes when turning left it gets stuck going left and then releases and will start tracking correctly. Also the parking brake will come on and lock the dozer in place. The red service light is on. Once we release the parking brake it seems to be working fine with no problem...
  6. C

    D5k2 flashing red at idle

    Hi, I have a 2014 D5k2. Serial KWW00881. 5061 hours. I get a flashing red exclamation mark inside a square when I sit at idle for just a couple minutes. It never comes up if I’m running the machine. And sometimes it won’t do it if I have it idled up all the way and sitting, but sometimes does. I...
Top