• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

gearbox

  1. J

    Kubota KH66 travel motor stuck after one revolution

    Hey, I’ve got a confusing issue on my trackhoe. It’s a kubota kh70, uses the same sprocket and tracks as a kh90. The right track is able to rotate one revolution of the sprocket and then it locks up. I turn it backwards and it does one revolution then gets stuck. Forwards one rev and stuck. I...
  2. M

    Hanomag 33C gearbox problem

    I am having problem with Hanomag 33C,it doesn't move with enough power, gearbox and torque converter has normal pressure, all oil changed, machine was moving bit better when it is warm, cardan from torque converter doesn't rotate gearbox so problem looks to be in torque converter, it was on...
  3. S

    1991 Telelect Captain II Digger Derrick removal

    I will preface this post by saying that I don't have much experience with cranes, especially digger derricks. I recently bought a 1991 Ford F800 with a Telelect Captain II Digger Derrick pole crane. I have removed the boom and I am struggling to get the turntable to come off. The rotation...
    • Steven66
    • Thread
    • crane derrick digger gearbox removal telelect terex turntable uninstall
    • Replies: 3
    • Forum: Cranes
  4. L

    Bobcat S650 motor not on carrier

    I bought a 2017 S650 with 400hrs on it. Put 100 hours on it and lost all the hydraulic oil into the chain case. After some reading and being unable to see which side was leaking I replaced left and right carrier seals (2 seals each side instead of one). It sucked and I was all ready to hang the...
  5. J

    The hydraulic axial motor that turns the turntable is leaking lubricant...

    So their was absolutely no lubricant in the hydraulic motor so we filled it back up again and ran right through and out the bottom. Is their a release valve that lets all the lubricant out or something? Its a Daewoo Solar 130 LC-V.
Top