2006 Kobelco sk330 ecm and ecu

[4digger]

hey guys. Been awhile since I posted on here but going out on a limb. We have a 06 kobelco sk330 dynamic acera. The machine ran fine, then sat for six months. We went to get it running and she wouldn’t start. Our Mechanic fiddled with it for a while and come up with both ecm and Ecu and also the monitor has been shorted. Was wondering if and body can shed some light on the situation or has a lead on parts. Thanks in advanced.

 

[TVA]

Did you jump or charged the batteries? Could be crossed polarity.

 

[4digger]

We pit new batteries in at the time. But they went in the same way they came out. Thanks

 

[Phantom970]

Lightning strike?

Sounds like it’s going to cost a small fortune regardless.

 

[LACHAU]

What have the messages been display on monitor? What fault code appear?
Please take some photos .

 

[4digger]

What have the messages been display on monitor? What fault code appear?
Please take some photos .

There were no messseges on the monitor as it had burnt resisters. Also when we would try and roll it over it would blow the monitor fuse every time.

 

[LACHAU]

There were no messseges on the monitor as it had burnt resisters. Also when we would try and roll it over it would blow the monitor fuse every time.

OK. You please inform your machine serial number then I will send to you their shop manual for your reference.

 

[4digger]

OK. You please inform your machine serial number then I will send to you their shop manual for your reference.


View attachment 193552 View attachment 193553 View attachment 193554

Hello. It’s yco7u1313. Thanks for the help.

 

[LACHAU]

Hello. It’s yco7u1313. Thanks for the help.

Already send. Please see download link in your conversation.