Scoops 63
New Member
code F9H9 on 320 JD skidsteer with hyd lock up issues. Solenoids replaced
-
Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!
320 JD skidsteer hyd lock up issues with code F9H9
- Thread starter Scoops 63
- Start date
I'm looking at putting a manual switch on the lockup solenoid. There is a pull circuit and a hold circuit probably and 3 wires if so. Pull will be low resistance and high amperage and hold will be high resistance and low amps. I'm guessing a switch and a start button would work. Put the hold function on the switch and use the start button for pull - that's my thinking at the moment.
mg2361
Senior Member
Welcome to HEF Scoops
!
F9H9 is the hydraulic solenoids or its wiring shorted to ground. If you replaced the 3 solenoids, then you have a wiring issue.
!F9H9 is the hydraulic solenoids or its wiring shorted to ground. If you replaced the 3 solenoids, then you have a wiring issue.