580sk sequence valve

[DiggerAfrique]

I removed my sequence valve ,don’t have a cam follower on the new pin.

I dont know how it was before the new pin .Is there a middle point to set it to swing both ways strongly.

I put shims to pull the shaft out ,and can get to work properly to the right ,left is a no go .

 

[DiggerAfrique]

Correction ,I removed the arm that works the valve

 

[1978case]

The sequence valve is used to adjust the cushion you need to slow the momentum of the boom swinging at full speed before it slams to a stop at full left or right. It will not work without the cam/follower and all the linkages.

 

[DiggerAfrique]

The sequence valve is used to adjust the cushion you need to slow the momentum of the boom swinging at full speed before it slams to a stop at full left or right. It will not work without the cam/follower and all the linkages.

I realise that ,I can slow boom myself.I can’t get it to swing on the left.Valve must be faulty ,another strip job.

Transaxle first . Had new brakes fitted ,but seal gas popped on one side .I thought it was a hose ,but nope .Not looking forward to the heavy weight.