• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

924H goes into Neutral while driving

Konstant

New Member
Joined
Jul 15, 2025
Messages
3
Location
Riga
Hello,
help me solve the problem with the 924H. The gearbox goes into neutral while driving. Display shows N, and the vehicle doesn't move. You should engage neutral gear and F or R again and you can continue driving. It happens randomly from time to time.
The parking brake is off, the neutralizer is off, the wiring has been checked, and the brake sensor has been replaced (the wire was worn out).
The problem occurs more often when driving over bumps or using the bucket.
The entire gearbox has been inspected: the oil, filters, and pressure are OK.plate.jpg
 

pittsburgh cat man

Senior Member
Joined
Oct 20, 2024
Messages
1,123
Location
saltsburg pa
Sounds to me like that is a controller on the steering column problem being that’s intermittent going to be tuff to prove might possibly be able to see it with et
 

Konstant

New Member
Joined
Jul 15, 2025
Messages
3
Location
Riga
Hello,

we checked through the dashboard, there are no errors. We noticed that if we move the wiring, a malfunction appears.
We'll check it out.
Does anyone have an electrical schematic? Can you share?
 
Top