racerboy832
Active Member
This is a uchida hydromatik pump. I am missing a piece from inside under one of the Allen caps on the external controller. I will pay for the dimensions so I can have them made. If you have one please let me know. Thank you
-
Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!
Anyone have a hydraulic pump that looks like this?
- Thread starter racerboy832
- Start date
This is a uchida hydromatik pump. I am missing a piece from inside under one of the Allen caps on the external controller. I will pay for the dimensions so I can have them made. If you have one please let me know. Thank you
clintm
Senior Member
- Joined
- Jul 7, 2013
- Messages
- 974
- Location
- charlotte nc
- Occupation
- trucking,concrete recycling,grading, demolition
what machine does it fit
racerboy832
Active Member
It is #2 in the photo I need
racerboy832
Active Member
My Machine is a IHI IS40G2 but the hydraulic shop was able to cross the piece being used on a John Deere 70D Excavator.
Get ALL the tag information off of it and call Western Hydrostatics out in California. Almost all of these Uchida pumps are 100% Rexroth licensed copies, these guys have gotten me Rexroth parts for several Uchida pumps with no problem.
Where i can find parts catalog like this??
kshansen
Senior Member
- Joined
- Mar 11, 2012
- Messages
- 11,410
- Location
- Central New York, USA
- Occupation
- Retired Mechanic in Stone Quarry
I'm probably a bit off on this but if you need the part from under "one" of the caps isn't there one under the other cap? Take that our and measure it.
racerboy832
Active Member
That would be logical however, the part I need is missing from both sides. I never seem to get that lucky. I tried calling ETS hydro and the other Big Name out of Washington and neither could cross over the part to a Rexroth. I will try Western in the morning. I was hoping someone would recognize the pump cause it would give me a couple more options to find the part. I am sure hoping for a miracle.
Appears to be the same as the Hitachi EX60 pump, should be an A10V43, but can't seem to find a match. What does it say on the tag?
The complete regulators should be available under the Deere number, I will assume you want to find a less costly alternative?
Looks like somebody was trying to find paradise with that pump set, the regulator screws are in so far you can't see them, just the locknuts?
The complete regulators should be available under the Deere number, I will assume you want to find a less costly alternative?
Looks like somebody was trying to find paradise with that pump set, the regulator screws are in so far you can't see them, just the locknuts?
racerboy832
Active Member
They are a10v28 pumps but I guess the A10v43 uses the same regulators. I can get them from deere and may have to but it's about $1500+ for them. This is just a machine to use around my home and I didn't plan on putting this much money into it.
Have you found the missing part of this pump? Coincidentally, my excavator pump is also missing a part like yours. Maybe you can share with me, thank you
racerboy832
Active Member
What pump do you have?
UCHIDA REXROTH A10V43LR