• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

ASV RC60 no movement

golfmechanic

New Member
Joined
Feb 23, 2024
Messages
4
Location
osterville, MA
good morning, I have an 2005 ASV RC60 and looking for electrical drawing and or service manual. machine will not move, no hydraulics at all. all fuses and the 3 safety switches were checked and even jumped out., relays swapped. looking for a little direction before i start ripping stuff apart. and of course everything stopped while operator was scraping snow so front end is in air a little with all weight on bucket, nice. not looking forward to getting underneath and removing belly pan and checking wiring there or possible stuck pilot valves.
 

Arny L

Senior Member
Joined
Sep 23, 2020
Messages
301
Location
canada
The pilot solenoids are under your feet, there is usually a removeable plate on top, or you can remove belly pan. I would be hoping its the pilot valves, or related wiring rather than coupler. A whole lot easier to fix.
 

golfmechanic

New Member
Joined
Feb 23, 2024
Messages
4
Location
osterville, MA
thanks, no plate on top, feet sit on fuel tank, all belly pan. just got info from ASVI and checking some things, like you suggested. see if i have pilot pressure, but doubt it.
 
Top