Boophoenix
Well-Known Member
Anyone have experiance with bolt on pads for a 312 to 315 size machine?
I'm in the market for a machine in this size range and thinking pads might save me a lot of trouble pulling behind a dump truck. I have a possability at a fair amount of work in subdivisions with the machine, but backing over curbs to unload is often times damaging to the trailer and the curb not to mention getting a large trailer jacked into little lot.
I had a torsion rod on a 22.5 ton trailer break on me a couple of years ago going down the interstate from curbing to unload doziers. Luckily for me it was night time and a few polite tractor trailer drivers gave me the warning honk. It had potential for a serious acident as the long end of the torsion rod was facing foward plowing and not draging ( seems this might be a design consideration for manufactures come to think of it, the joint seems to always be to the front leaving the long end to the rear ).
The bulk of the lots will be dirt, but there will ocationally be rock which I understand can't be very forgiving to the pads.
I'm in the market for a machine in this size range and thinking pads might save me a lot of trouble pulling behind a dump truck. I have a possability at a fair amount of work in subdivisions with the machine, but backing over curbs to unload is often times damaging to the trailer and the curb not to mention getting a large trailer jacked into little lot.
I had a torsion rod on a 22.5 ton trailer break on me a couple of years ago going down the interstate from curbing to unload doziers. Luckily for me it was night time and a few polite tractor trailer drivers gave me the warning honk. It had potential for a serious acident as the long end of the torsion rod was facing foward plowing and not draging ( seems this might be a design consideration for manufactures come to think of it, the joint seems to always be to the front leaving the long end to the rear ).
The bulk of the lots will be dirt, but there will ocationally be rock which I understand can't be very forgiving to the pads.