Metalman 55
Senior Member
Today was a nice day out there, so Tony & I tackled rebuilding the hyd track adjusters on the 450C dozer. The LH side came apart very hard, with all internal components being seized up, had to pull them apart with the grease gun & come along both.
The 2nd side went much better & they work nicely now. Pistons are somewhat pitted, likewise the bore, but if need be I will just have to add some grease if they leak past some........at least they work freely now!
The 2nd side went much better & they work nicely now. Pistons are somewhat pitted, likewise the bore, but if need be I will just have to add some grease if they leak past some........at least they work freely now!
