I know this is an old thread but have you had any more dealings with this machine? I have just got an after market axle I am looking to make work on my early 85xt with the inboard seal by opening up the spacer like you did on your first repair- it seams like a futile effort if both machines in this thread axles broke so soon!
-
Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!
Case 85XT Axle Broken Again
- Thread starter Tradbeau
- Start date
-
- Tags
- 85xt axle broken axle
Tradbeau
Member
I'm currently still running on the version two axle I put on after my aftermarket axle broke. It's been about 3 years now.
New from Case or a used one? From what I could tell it was going to be $1500 getting it from CNH. Thanks for the reply.
Muffler Bearing
Senior Member
I don't know what happened next, I'm sure the customer was not happy with our repair
I ran into this a few years ago so I took a torch and heated my spacer white hot on the edge drove it over the splines with a pipe and hammer till it looked right I don’t have pictures but it turned out perfect still working