Case CX235C Final drive

[Ryan Phillips]

Morning,

Doing a floating seal replacement on a Case CX235C. I am down to splitting the final, i have removed the 8 T90 torx bolts which i assumed held the two halves together. There is no outer retaining nut like i am familiar with. How do you split the hub from the motor side on this? I dont have any service information on this so any help would be greatly appreciated.

Thanks!

 

[Ryan Phillips]

Update, its split. plate was seized on there, bearings also

 

[Coy Lancaster]

I was gonna tell you to hit it with a big hammer.