Mark250
Senior Member
- Joined
- Aug 30, 2015
- Messages
- 1,244
- Location
- victoria,Australia
- Occupation
- heavy equipment technician
are you using the duty cycle /percentage setting on multimeter?Just checked pin 2 and 3 on duty cycle for anything and with the key on and with engine running I get 3.6v and that's it. I move the thumb wheel both ways and I do not a change if that's what I have to do.
if you are, check with the signal wire removed from connector and recheck. The percentage should change, if not sounds like a possible faulty module in joystick
Mark