Hey Guys, I would really appreciate some help on this. I have a 1993 Cat 312 that I use as mostly a farm unit. I was doing some low power dirt work & the hydraulic's pretty much shut down, I have about 5% hydraulic's. The 1st thing that I did was to change the tank & spin on filters, this did not do any good. I cut open both filters & no metal (Thank God for that). I am thinking ma-by a stomped up valve or regulator some where. Thought I would ask you guys before I called a Cat. I just got laid off & really don't have the $$$ for a visit from those guys.
Any thoughts on this problem would be much appreciated.
I will post the fix, if I ever figure it out.
Thanks,
Rube
Any thoughts on this problem would be much appreciated.
I will post the fix, if I ever figure it out.
Thanks,
Rube