• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Cat 345BL blowing 10 amp key switch fuse

FredMcAlister

New Member
Joined
Jul 2, 2020
Messages
2
Location
Indiana
Serial # 5WS0295

Blows the 10 amp fuse to the key switch, red wire marked 105.

The power relay that looks like a starter solenoid was hot, and the many yellow wires marked 308 have an abundance of connections. Some sections of 308 show various ohms between them and ground when testing for a short.

Any help or anyone with access to an electrical schematic would be much appreciated.

Thank you,
Fred
 

1693TA

Senior Member
Joined
Feb 27, 2010
Messages
2,687
Location
Farmington IL
Occupation
FAA Radar Engineer, (Retired)
Don't push your luck here. I'm going after a new New Holland tractor early next week that kept doing near the same and the owner consistently replaced the blown fuse with a larger so he could finish harvest. Tractor will probably be salvage as the engine harness got a bit warm taking the hood, cab, dash, and all hydraulic hoses with it on the loader frame.
 
Top