• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Cat 415F IL diagnostic codes

tylermckee

Senior Member
Joined
Jan 9, 2006
Messages
768
Location
washington
Anyone on here have some info on the following codes this machine started throwing? 2017 415f IL
5055-18
1888-3
653-6
639-2
2524-3
machine serial CAT0415FVPF400675

Machine is new to us, was running fine then had very little drive power (engine seems to be running ok) and warning light in cluster came on
replaced fuel filters, warning light went away and seemed to be running better but now back to low power.

Cat tech scheduled to look at it next week but would like to see if its something simple
 

Nige

Senior Member
Joined
Jun 22, 2011
Messages
29,759
Location
G..G..G..Granville.........!! Fetch your cloth.
5055-18 - Fuel in engine oil.
1888-3 - GPS antenna voltage above normal
653-6 - Injector cylinder #3 current above normal
639-2 - problem on J1939 Datalink
2524-3 - Product Link antenna voltage bove normal

Looks from that list as though an engine oil & filter change should be first on your list and see where that takes you. When the tech arrives he'll have to do the tests on #3 injector.
 

tylermckee

Senior Member
Joined
Jan 9, 2006
Messages
768
Location
washington
5055-18 - Fuel in engine oil.
1888-3 - GPS antenna voltage above normal
653-6 - Injector cylinder #3 current above normal
639-2 - problem on J1939 Datalink
2524-3 - Product Link antenna voltage bove normal

Looks from that list as though an engine oil & filter change should be first on your list and see where that takes you. When the tech arrives he'll have to do the tests on #3 injector.
Update- tech came, reset the oil life, ran a Regen cycle, tested the injectors, cleared codes, all is fine. He thinks that possibly just resetting the oil life would have done it.

All has been fine, he mentioned if it does it again then we may have an issue with the #3 injector that was throwing the code originally, but no sense in digging into it at the moment.
 
Top