941oldB
Member
Thanks Nige! I got a 6J5522. When I looked it up, the description simply read "plate". So it looks like I will need to tear it down and measure prior to ordering.
Appreciate the help!
Appreciate the help!
-
Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!
Cat 941b steering clutch wear limits
- Thread starter charles walton
- Start date
Nige
Senior Member
Did you look for any numbers cast into the heads of the lift/tilt cylinders.?
Nige
Senior Member
A bit of further research reveals that it doesn't matter what Part number of cylinder you have the seal kit Part Number is the same. the numbers below are for STD size cylinder barrels. There are no oversize kits.
Lift Cylinder - 241-0901 (breakdown below)
Tilt Cylinder - 241-8925
Lift Cylinder - 241-0901 (breakdown below)
Tilt Cylinder - 241-8925
941oldB
Member
Thank you for all the research Nige. Do you have all this stuff hard copy, or do you have an on-line internet source? I got a large amount of land clearing yet ahead of me, and I know I will likely break something else. So I'd rather not be a burden, but I sincerely do appreciate the expert help you have provided!
I have ordered the seal kit. Once here, I will replace.
Thanks!
I have ordered the seal kit. Once here, I will replace.
Thanks!
Nige
Senior Member
I just download it in pdf and delete it as soon as it is posted up.
With a machine the age of yours it might pay you to invest in a Parts Manual. There are various ones for an 80H machine depending on Serial Number but the one you need is UEG0680S covering Serial Numbers from 3884 to 5702. The publication is still available from Cat in all three forms listed below. You may be able to find a used paper copy somewhere in the internet for less.
With a machine the age of yours it might pay you to invest in a Parts Manual. There are various ones for an 80H machine depending on Serial Number but the one you need is UEG0680S covering Serial Numbers from 3884 to 5702. The publication is still available from Cat in all three forms listed below. You may be able to find a used paper copy somewhere in the internet for less.
941oldB
Member
Wow! Thank you Nige!