Nige
Senior Member
Gotcha. I doubt if the electrical pinout/wire colours for that harness are available anywhere other than a factory drawing.
I'll ask around and see what turns up.
What's strange is that the schematic for the planer clearly shows an 8-pin connector and the poster says he has 9 wires.
EDIT: It would be strange if the wire colours & numbers in the "jumper" harness were any different to what's on the machine or what's in the planer though.
I'll ask around and see what turns up.
What's strange is that the schematic for the planer clearly shows an 8-pin connector and the poster says he has 9 wires.
EDIT: It would be strange if the wire colours & numbers in the "jumper" harness were any different to what's on the machine or what's in the planer though.