dirtpusher9
Well-Known Member
I was wondering if someone has some detailed pics of the 463 pull? I'm planing on building one to pull with my D9R. Any help would be appreciated.
Not really a trunion, it's about an 10" + or - steel ball that fits into a brass bushing in the neck then a flange is bolted from the bottom side of the ball into the neck to keep it in place. The ball has a tapered stem that goes thru the dolly and is bolted with a heavy washer from underneath. It looks like an ice cream cone, the ice cream being the ball and the cone the stemDPete,
Is that a trunion that hooks the front wheel set to the scraper?
Dpete, I'm building a 1/10 scale model of it to pull behind a D9R model that I also built and just need some good pics of the whole unit. I appreciate the pics. Sorry for the confusion.
Anyone know what the tire size on that scraper is? I have A used set of 40/65 R39, wondering what they go to.
Anyone know what the tire size on that scraper is? I have A used set of 40/65 R39, wondering what they go to.